A Step By Step Guide To Making Sure Your House Is Completely Sound
If you’re purchasing a new home, checking the structural integrity of the house is a critical and obvious step before agreeing to buy; however, many homeowners forget to keep an eye out for structural problems as the house ages. Even in the most well-built homes problems can arise, and catching them early can save you serious cash down the line.
Whether you’re purchasing a new home or just checking up on your existing one, this step-by-step process will help you make sure your home is structurally sound.
Check for foundation problems
Look for cracks in ceilings and walls. Pay particular attention to areas around windows and doors, as these are the areas where foundation cracks typically first appear. Cracks in the drywall or molding can just be a surface problem, or it can indicate more serious problems with the foundation. If you believe the foundation might be shifting, foundation contractors Houston, or a local contractor in your area, should inspect the home as soon as possible.
Check the roof thoroughly
Look for worn, ragged, or broken shingles. If the house has gutters that you can safely access, it’s worth having a look in them. The presence of a large quantity of “black sand” in the gutters is a good indicator of a failing roof. Remember that even the best of roofs will need to be replaced every few decades.
Check the floor joists
Walk the entire floor of the home, feeling for depressed, sloping, or bowed areas. Particularly if you’re inspecting a house for purchase, it’s important to pull up any carpets or surface flooring to check underneath. Jump once or twice in the center of each room. The floor should feel solid. If you feel any flexing under your feet, it’s usually a bad sign.
Check for water damage
If the house has a basement, check it for water damage. Look for obvious signs of moisture, as well as the characteristic damp smell that accompanies prolonged mold exposure. Outside the house, pay particular attention to gutters and eaves. Check behind the gutter and over the overhang, which is where roof water damage is most likely to occur.
Make sure the wiring is up to code
This is difficult to do thoroughly without the help of an inspector, but it’s a critical step, particularly if you’re checking the house for purchase. A house with old or outdated wiring is extremely difficult to insure, and can be at risk for fire.